A Nifty Illuminating Idea

When we are just sitting around a night, we don't really want to have even one of the flourescent light fixtures turned on, as we do find they give off a lot of light, and they are in the cooler blue colour spectrum. We came up with the idea of using one of those battery operated rings of LED light, sitting on top of the microwave cabinet, which being relatively close to the ceiling, allows the light to reflect off the aluminum interior. It is a much nicer lighting effect, and easier on the eyes.

Taking this idea a bit further, I thought of using one of the extra LED strips we got for our sink light project, and somehow incorporating it as a permanent fixture. After some thought, I mounted the LED strip to a short piece of aluminum angle stock. Then this was screwed to the very back of the microwave cabinet. One end of the angle was tapered so it would not contact the ceiling when the roof was lowered. I wired the light and placed the switch right beside the one for the sink. It gives off more light than the battery unit, and reflected off the ceiling, provides a perfect amount of indirect illumination. The colour temperature is warm white, which is more pleasing to the eye.  



2 comments:

  1. We love this mod! Definitely on our project list for our new to us Alto 1723 #77. We are in Toronto and eager to start using it in the spring.
    Doug Farrand

    ReplyDelete
    Replies
    1. Make certain you slope the angle bar or you risk poking a little hole in the ceiling. I ensured clearance by test fitting with the roof down.

      Jim

      Delete